36 research outputs found

    Robust Synchronization of the Unified Chaotic System

    Get PDF
    The paper investigates the synchronization problem of the unified chaotic system. The case of identical, but unknown master and slave unified chaotic systems is considered. Based on compound matrices formalism, a unified synchronization control scheme is proposed independently of the unknown system parameter. Simulation results are provided to show the effectiveness of the presented scheme

    Passive Mixer-based UWB Receiver with Low Loss, High Linearity and Noise-cancelling for Medical Applications

    Get PDF
    A double balanced passive mixer-based receiver operating in the 3-5 GHz UWB for medical applications is described in this paper. The receiver front-end circuit is composed of an inductorless low noise amplifier (LNA) followed by a fully differential voltage-driven double-balanced passive mixer. A duty cycle of 25% was chosen to eliminate overlap between LO signals, thereby improving receiver linearity. The LNA realizes a gain of 25.3 dB and a noise figure of 2.9 dB. The proposed receiver achieves an IIP3 of 3.14 dBm, an IIP2 of 17.5 dBm and an input return loss (S11) below -12.5dB. Designed in 0.18μm CMOS technology, the proposed mixer consumes 0.72pW from a 1.8V power supply. The designed receiver demonstrated a good ports isolation performance with LO_IF isolation of 60dB and RF_IF isolation of 78dB

    The evolving SARS-CoV-2 epidemic in Africa: Insights from rapidly expanding genomic surveillance

    Get PDF
    INTRODUCTION Investment in Africa over the past year with regard to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequencing has led to a massive increase in the number of sequences, which, to date, exceeds 100,000 sequences generated to track the pandemic on the continent. These sequences have profoundly affected how public health officials in Africa have navigated the COVID-19 pandemic. RATIONALE We demonstrate how the first 100,000 SARS-CoV-2 sequences from Africa have helped monitor the epidemic on the continent, how genomic surveillance expanded over the course of the pandemic, and how we adapted our sequencing methods to deal with an evolving virus. Finally, we also examine how viral lineages have spread across the continent in a phylogeographic framework to gain insights into the underlying temporal and spatial transmission dynamics for several variants of concern (VOCs). RESULTS Our results indicate that the number of countries in Africa that can sequence the virus within their own borders is growing and that this is coupled with a shorter turnaround time from the time of sampling to sequence submission. Ongoing evolution necessitated the continual updating of primer sets, and, as a result, eight primer sets were designed in tandem with viral evolution and used to ensure effective sequencing of the virus. The pandemic unfolded through multiple waves of infection that were each driven by distinct genetic lineages, with B.1-like ancestral strains associated with the first pandemic wave of infections in 2020. Successive waves on the continent were fueled by different VOCs, with Alpha and Beta cocirculating in distinct spatial patterns during the second wave and Delta and Omicron affecting the whole continent during the third and fourth waves, respectively. Phylogeographic reconstruction points toward distinct differences in viral importation and exportation patterns associated with the Alpha, Beta, Delta, and Omicron variants and subvariants, when considering both Africa versus the rest of the world and viral dissemination within the continent. Our epidemiological and phylogenetic inferences therefore underscore the heterogeneous nature of the pandemic on the continent and highlight key insights and challenges, for instance, recognizing the limitations of low testing proportions. We also highlight the early warning capacity that genomic surveillance in Africa has had for the rest of the world with the detection of new lineages and variants, the most recent being the characterization of various Omicron subvariants. CONCLUSION Sustained investment for diagnostics and genomic surveillance in Africa is needed as the virus continues to evolve. This is important not only to help combat SARS-CoV-2 on the continent but also because it can be used as a platform to help address the many emerging and reemerging infectious disease threats in Africa. In particular, capacity building for local sequencing within countries or within the continent should be prioritized because this is generally associated with shorter turnaround times, providing the most benefit to local public health authorities tasked with pandemic response and mitigation and allowing for the fastest reaction to localized outbreaks. These investments are crucial for pandemic preparedness and response and will serve the health of the continent well into the 21st century

    A Broadband High Gain, Noise-Canceling Balun LNA with 3–5 GHz UWB Receivers for Medical Applications

    No full text
    The Ultra-Wideband Wireless Body Area Network (UWB-WBAN) has been identified to provide an efficient, low-power, and improved wireless communication between sensor nodes worn by the human body to monitor physiological signals. The first part of the UWB receiver is a low noise amplifier (LNA). This article describes an upgrade to a sort of balun LNA that is entirely transistor-based and devoid of inductors for medical worn communication service. The balun LNA uses common gate and a common source configuration which cancels the noise generated by the common gate. This work uses the transistors in place of resistors to minimize the integrated circuit's area, as well as finding the best values for the dimensions of the transistor to minimize energy consumption, achieve a high gain and good linearity. This reduces the noise figure. The designed system utilizes the UWB frequency range of 3-5 GHz and a voltage supply of 1.8V.  The designed balun LNA is able to achieve a peak gain of 25.5 dB and noise figure (NF) less than 3.2-3.5 dB using 180µm TSMC CMOS technology. The IIP3 is quite high at 2 dBm, whereas the IIP2 maximum is 21 dBm. The entire power consumption is less than 7.2 mW

    A Novel Pulse Shaping for UWB Impulse Radio IEEE 802.15.4a Communications Systems

    No full text
    This paper presents a novel pulse shape which we call modified triangular pulse (MTri) for Impulse Radio-Ultra Wide Band (IR-UWB) IEEE 802.15.4a systems. The MTri pulse and UWB shapes previously proposed for low power IR-UWB transceivers topologies are studied and compared. The performance measures considered are compliance with required spectral emission constrains, Mask Loss (ML) power and pulse energy. Our theoretical and simulations results show the advantages of the MTri pulse over studies UWB pulses. It presents the lower ML power about 0.45dB and the higher pulse energy of 0.45nJ/p

    Analysis of Device Mismatches Effect on the Performance of UWB Receiver Front-End in Wireless Body Area Network Sensor Nodes

    No full text
    Today it is important to manufacture high quality integrated circuits which are insensitive to device mismatches. This paper presents an analysis of MOSFET transistors mismatches effect on the performance of UWB receiver front-end which constitute the most important part of Wireless Body Area Network sensor node. The receiver is based on Balun LNA with 25% fully differential double-balanced passive mixer. A PMOS and NMOS transistors mismatch models were proposed to determine LNA output offset voltage and mixer offset current respectively. The analysis result suggests that, to minimize NMOS current mismatch, and thus reducing second-order inter modulation distortion, the overdrive voltage  must be maximized. A Monte Carlo and harmonic balance simulations were performed using 0.18µm CMOS process to evaluate the impact of mismatch as well as Vth mismatch on the receiver gain and IIP2. Simulation results show that IIP2 of the receiver is less sensitive to mixer NMOS mismatch but receiver gain is more sensitive. The receiver IIP2 confidence interval in case of NMOS  mismatch is [24.674, 24.77]dBm and in case of NMOS Vth mismatch is [24.659, 24.857]dBm. This show the robustness of the proposed UWB receiver front end. Therefore the proposed circuit meets the requirement of UWB system perfectly which make it suitable for WBAN applications

    An Energy-Efficient Tunable CMOS UWB Pulse Generator

    No full text
    International audienc
    corecore